If you own a Kenmore Elite washer and are seeing the LE error code, don’t panic. This code indicates a problem with the drive motor, but with a little troubleshooting, you can fix the issue and get your washer back up and running in no time.
There are several possible causes for the LE error code, including overloading the washer, using too much detergent, obstructions in the drive system, loose wiring connections, or a failed drive motor or tachometer. By following these steps, you can troubleshoot and fix the issue:
1. Check the load size: Make sure you haven’t overloaded the washer. Remove some clothes and restart the cycle.
2. Reduce detergent usage: Excessive suds can trigger the LE error code. Let the washer sit idle for 30 minutes to allow the foam to dissipate. Run a Drain/Spin cycle to remove the sudsy water, then run a new cycle without adding any detergent. For future loads, reduce the amount of high-efficiency detergent to about 1 tablespoon.
3. Inspect the drive system: Check the rotation of the spin basket to see if there is any obstruction. If necessary, manually rotate the spin basket to check for binding or resistance.
4. Check for loose wiring: Inspect the wire connections between the control board, drive motor, and tachometer. Replace any loose wires or damaged wire harnesses.
5. Consider motor or tachometer replacement: If the wire connections and rotor magnets are okay, it may be necessary to replace the motor tachometer or drive motor. It is recommended to have a service technician examine the washer and test the tachometer and motor to accurately determine which parts need replacing.
By following these troubleshooting steps, you can resolve the LE error code on your Kenmore Elite washer and ensure its optimal performance.
Key Takeaways:
- LE error code on a Kenmore Elite washer indicates a problem with the drive motor.
- Possible causes include overloading, excessive detergent, obstructions, loose wiring, or a failed motor.
- Troubleshooting steps include checking the load size, reducing detergent usage, inspecting the drive system, and checking for loose wiring.
- If necessary, consult a service technician to accurately diagnose and fix the issue.
- Addressing the LE error code promptly will ensure optimal performance of your Kenmore Elite washer.
Troubleshooting Kenmore Elite Washer Error Codes LE
If you encounter the LE error code on your Kenmore Elite washer, here are some troubleshooting steps you can take to resolve the issue:
- Check for Overloading: Make sure the washer is not overloaded with clothes. Remove some items and restart the cycle.
- Reduce Detergent Usage: If there is excessive suds in the tub, let the washer sit idle for 30 minutes to allow the foam to dissipate. Run a Drain/Spin cycle to remove the sudsy water and then run a new cycle without adding any detergent. For future loads, reduce the amount of high-efficiency detergent to about 1 tablespoon per load.
- Inspect the Drive System: Check the rotation of the spin basket. If the spin basket does not rotate smoothly, there may be an obstruction or a damaged spin bearing. If necessary, manually rotate the spin basket and check for any resistance or binding. A service technician may be required to repair this issue.
- Check for Loose Wiring or Defective Motor: Inspect the wire connections between the control board, drive motor, and tachometer. Reconnect any loose wires and replace any damaged wire harnesses. If the wire connections and rotor magnets are in good condition, consider replacing the motor tachometer or drive motor.
- Consult a Service Technician: If the issue persists after troubleshooting, it is recommended to seek assistance from a professional service technician. They can accurately diagnose the issue and perform the necessary repairs or replacements.
Conclusion
In conclusion, the Kenmore Elite washer error code LE is commonly associated with a problem in the drive motor. By following the troubleshooting steps outlined in this article, you can effectively diagnose the cause of the error and resolve it efficiently.
To avoid encountering the LE error code, it is important to ensure that you do not overload the washer and use the appropriate amount of detergent for each load. Additionally, regularly checking for any obstructions in the drive system can help maintain the optimal performance of your Kenmore Elite washer.
If you have followed the troubleshooting steps and are still unable to resolve the issue, we recommend consulting a professional service technician. They have the expertise to accurately diagnose and repair any underlying problems with the drive motor or other components of your washer.
By promptly addressing the LE error code and taking the necessary steps to troubleshoot and resolve the issue, you can ensure that your Kenmore Elite washer continues to operate smoothly and efficiently, providing you with clean and fresh laundry every time.
FAQ
What does the LE error code on a Kenmore Elite washer indicate?
The LE error code indicates a problem with the drive motor of the washer.
What could be the possible causes of the LE error code?
Possible causes of the LE error code include overloading the washer, using too much detergent, obstruction in the drive system, loose wiring connections, or a failed drive motor or tachometer.
How can I troubleshoot and fix the LE error code?
To troubleshoot and fix the LE error code, you can follow these steps:
– Make sure the washer is not overloaded by removing some clothes and restarting the cycle.
– If there are excessive suds in the tub, let the washer sit idle for 30 minutes to allow the foam to dissipate. Run a Drain/Spin cycle to remove the sudsy water, then run a new cycle without adding any detergent.
– Check the rotation of the spin basket to see if there is any obstruction. If necessary, manually rotate the spin basket to check for binding or resistance.
– If the spin basket rotates smoothly, check for loose wiring or a defective drive motor or tachometer. Inspect the wire connections between the control board, drive motor, and tachometer. Replace any loose wires or damaged wire harnesses.
– If the wire connections and rotor magnets are okay, consider replacing the motor tachometer or drive motor. It is recommended to have a service technician examine the washer and test the tachometer and motor to accurately determine which parts need replacing.
What should I do if I encounter the LE error code on my Kenmore Elite washer?
If you encounter the LE error code on your Kenmore Elite washer, here are some troubleshooting steps you can take to resolve the issue:
1. Check for Overloading: Make sure the washer is not overloaded with clothes. Remove some items and restart the cycle.
2. Reduce Detergent Usage: If there is excessive suds in the tub, let the washer sit idle for 30 minutes to allow the foam to dissipate. Run a Drain/Spin cycle to remove the sudsy water and then run a new cycle without adding any detergent. For future loads, reduce the amount of high-efficiency detergent to about 1 tablespoon per load.
3. Inspect the Drive System: Check the rotation of the spin basket. If the spin basket does not rotate smoothly, there may be an obstruction or a damaged spin bearing. If necessary, manually rotate the spin basket and check for any resistance or binding. A service technician may be required to repair this issue.
4. Check for Loose Wiring or Defective Motor: Inspect the wire connections between the control board, drive motor, and tachometer. Reconnect any loose wires and replace any damaged wire harnesses. If the wire connections and rotor magnets are in good condition, consider replacing the motor tachometer or drive motor.
5. Consult a Service Technician: If the issue persists after troubleshooting, it is recommended to seek assistance from a professional service technician. They can accurately diagnose the issue and perform the necessary repairs or replacements.
What does the LE error code indicate on a Kenmore Elite washer?
The LE error code on a Kenmore Elite washer indicates a problem with the drive motor.
How can I resolve the LE error code on my Kenmore Elite washer?
To resolve the LE error code on your Kenmore Elite washer, you can follow these troubleshooting steps:
1. Check for Overloading: Make sure the washer is not overloaded with clothes. Remove some items and restart the cycle.
2. Reduce Detergent Usage: If there is excessive suds in the tub, let the washer sit idle for 30 minutes to allow the foam to dissipate. Run a Drain/Spin cycle to remove the sudsy water and then run a new cycle without adding any detergent. For future loads, reduce the amount of high-efficiency detergent to about 1 tablespoon per load.
3. Inspect the Drive System: Check the rotation of the spin basket. If the spin basket does not rotate smoothly, there may be an obstruction or a damaged spin bearing. If necessary, manually rotate the spin basket and check for any resistance or binding. A service technician may be required to repair this issue.
4. Check for Loose Wiring or Defective Motor: Inspect the wire connections between the control board, drive motor, and tachometer. Reconnect any loose wires and replace any damaged wire harnesses. If the wire connections and rotor magnets are in good condition, consider replacing the motor tachometer or drive motor.
5. Consult a Service Technician: If the issue persists after troubleshooting, it is recommended to seek assistance from a professional service technician. They can accurately diagnose the issue and perform the necessary repairs or replacements.
Should I consult a professional service technician if the LE error code persists?
Yes, if the LE error code persists after troubleshooting, it is recommended to consult a professional service technician. They have the expertise to accurately diagnose the issue and perform the necessary repairs or replacements.
Leave a Reply