If you own a Whirlpool washer, you might be familiar with the frustration of encountering the F35 error code. This code indicates a problem with the pressure sensor switch, which can lead to issues with water flow and the overall functioning of your washer. But don’t worry, we’re here to help you understand what causes this error and how you can fix it.
Common Issues and Troubleshooting Tips for F35 Code on Whirlpool Washer
Encountering the F35 code on your Whirlpool washer can be frustrating, but there are common issues that can cause this error. By troubleshooting these issues, you can resolve the F35 code and get your washer back to its optimal functioning. Let’s explore some of the common issues and troubleshooting tips:
1. Kinked or Clogged Hose
A kinked or clogged hose leading to the pressure sensor switch is a frequent culprit behind the F35 code on a Whirlpool washer. To troubleshoot this issue:
- Inspect the hose for any kinks, twists, or clogs.
- If you find any obstructions, straighten the hose or remove the clog.
- Ensure that the hose is properly connected at both ends, securely attached to the pressure sensor switch and the main control board.
2. Broken Hose
A broken hose can also trigger the F35 code on your Whirlpool washer. To address this issue:
- Visually inspect the hose for any signs of damage or cracks.
- If you find a broken hose, replace it with a new one to restore proper functionality.
3. Faulty Pressure Sensor Switch
A faulty pressure sensor switch is another potential cause of the F35 code. Here’s what you can do:
- If the hose is clear and intact, the pressure sensor switch may need to be replaced.
- Consult the manufacturer’s instructions or seek professional assistance to safely replace the pressure sensor switch.
By troubleshooting these common issues related to the F35 code on your Whirlpool washer, you can effectively resolve the problem and ensure your washer functions smoothly.
| Common Issues | Troubleshooting Tips |
|---|---|
| Kinked or Clogged Hose | Inspect and clear any obstructions in the hose. Ensure proper connection. |
| Broken Hose | Replace the broken hose with a new one. |
| Faulty Pressure Sensor Switch | Consult manufacturer instructions or seek professional assistance for replacement. |
Alternative Methods to Fix F35 Code on Whirlpool Washer
In addition to checking the hose and replacing the pressure sensor switch, there are some alternative methods that may help resolve the F35 code on a Whirlpool washer.
Method 1: Use Vinegar to Clean the Pressure Sensor Switch and Hose
If you suspect that the F35 code is triggered by a buildup of residue or mineral deposits, you can try using vinegar to clean the pressure sensor switch and hose. Here’s how:
-
Turn off the washer and unplug it from the power source.
-
Locate the pressure sensor switch and the hose connected to it.
-
Gently disconnect the hose from the pressure sensor switch and pour vinegar into a container.
-
Place the disconnected end of the hose into the container filled with vinegar, ensuring it is fully submerged.
-
Let the hose soak in vinegar for about 30 minutes to help dissolve any residue.
-
After 30 minutes, remove the hose from the vinegar and rinse it thoroughly with water.
-
Reconnect the hose to the pressure sensor switch, making sure it is securely attached.
-
Plug the washer back in and test if the F35 code has cleared.
Method 2: Remove Soap Dispenser Drawer and Clean Soap Residue
In some cases, the F35 code may be caused by a blockage in the flow of water due to soap or residue buildup. Cleaning the soap dispenser drawer can help resolve this issue. Here’s what you can do:
-
Turn off the washer and unplug it from the power source.
-
Locate the soap dispenser drawer and press the release button or lever to remove it.
-
Inspect the drawer for any build-up of soap or residue.
-
Using a mild detergent and warm water, clean the soap dispenser drawer thoroughly.
-
Rinse the drawer with clean water and make sure it is completely dry.
-
Reinstall the soap dispenser drawer by sliding it back into place until it clicks securely.
-
Plug the washer back in and check if the F35 code persists.
Remember to follow proper safety precautions and consult the manufacturer’s instructions or a professional for guidance when attempting these alternative methods.
| Alternative Methods | Description |
|---|---|
| Method 1: Use Vinegar to Clean the Pressure Sensor Switch and Hose | Clean the pressure sensor switch and hose with vinegar to remove mineral deposits and residue. |
| Method 2: Remove Soap Dispenser Drawer and Clean Soap Residue | Clean the soap dispenser drawer to remove any blockage caused by soap or residue buildup. |
Conclusion
We understand that dealing with the F35 code on your Whirlpool washer can be frustrating. However, with proper troubleshooting and potentially replacing the pressure sensor switch, you can resolve this issue and get your washer back up and running smoothly.
When troubleshooting the F35 code, it is crucial to follow safety guidelines throughout the process. Always consult the manufacturer’s instructions or seek assistance from a professional if you are unsure about any repair or troubleshooting steps. Your safety and the proper functioning of your washer are our top priorities.
By addressing the underlying cause of the F35 code, such as a kinked hose or a faulty pressure sensor switch, you can ensure that your Whirlpool washer continues to operate effectively. Regular maintenance and thorough cleaning of the pressure sensor switch and hose can also help prevent future occurrences of the F35 code.
If you encounter persistent issues or are unsure about the repairs needed, we strongly recommend contacting Whirlpool’s customer support for further assistance. They have the expertise to guide you through the troubleshooting process and provide specific solutions tailored to your Whirlpool washer model.
FAQ
What does the F35 error code on a Whirlpool washer indicate?
The F35 error code on a Whirlpool washer usually indicates a failure of the pressure sensor switch.
How can I fix the F35 error code on my Whirlpool washer?
To fix the F35 error code, start by checking the hose going to the pressure sensor switch for any kinks, clogs, or breaks. Ensure that the hose is properly connected on both ends. Remove the hose from the sensor and blow through it to remove any restrictions. Check the wire connections to the sensor at both the sensor and main control board. If everything looks fine, consider replacing the pressure sensor switch.
What are some common issues that can cause the F35 code on a Whirlpool washer?
Common issues that can cause the F35 code include a kinked or clogged hose leading to the pressure sensor switch, a broken hose, or a faulty pressure sensor switch.
How can I troubleshoot the F35 code on my Whirlpool washer?
To troubleshoot the F35 code, start by checking the hose for any obstructions or damage. Ensure that the hose is properly connected. If the hose is clear and intact, consider replacing the pressure sensor switch. It is recommended to follow the manufacturer’s instructions or consult a professional for assistance.
Are there any alternative methods to fix the F35 code on a Whirlpool washer?
Yes, there are some alternative methods that may help resolve the F35 code. One method is to use vinegar to clean the pressure sensor switch and hose. Another method involves removing the soap dispenser drawer and cleaning any built-up soap or residue that may be blocking the flow of water. Always follow safety precautions and consult the manufacturer’s instructions or a professional for guidance on these methods.
Leave a Reply