Are you tired of encountering error codes on your Maytag appliances? Specifically, the F7E1 and F7E7 error codes? These codes indicate a motor speed sensing error, which can disrupt the normal functioning of your appliance. But fear not, we’re here to help you unravel the mystery behind these error codes and guide you through the process of fixing them.
Before we dive into troubleshooting the F7E1 and F7E7 error codes, it’s important to understand what they mean. These codes suggest that the motor in your Maytag appliance is unable to achieve the correct speed for the selected cycle. Now, let’s investigate the possible causes and solutions to eliminate these error codes and restore the optimal performance of your appliance.
Key Takeaways:
- The F7E1 and F7E7 error codes on Maytag appliances indicate a motor speed sensing error.
- Check if the shipping bolts have been removed from the rear of the washer to prevent noise, vibration, or error codes.
- Overloading the washer can also trigger these error codes.
- Try unplugging the washer or disconnecting the power for one minute to reset the system.
- If the error codes persist, consult the owner’s manual or contact Maytag customer support for assistance.
Troubleshooting F7E1 Error Code Maytag
Encountering the F7E1 error code on your Maytag appliance can be frustrating, but don’t worry – we’re here to help you troubleshoot and resolve the issue. By following these simple steps, you can effectively fix the F7E1 error code and get your appliance back up and running smoothly.
Step 1: Press Pause or Cancel and Power Buttons
Start by pressing the Pause or Cancel button twice on your Maytag appliance. Then, press the Power button once. Please note that the specific method for removing the displayed code may vary depending on the model of your appliance.
Step 2: Unplug or Disconnect Power
If the F7E1 error code is still displayed, try unplugging the washer or disconnecting the power for one minute. This step allows the appliance to reset and may clear the error code. After one minute, plug the washer back in or reconnect the power.
Step 3: Reselect Cycle and Press Start
After reconnecting the power, make sure to reselect the desired cycle on your Maytag washer. Once the cycle is selected, press the Start button. This action will initiate the cycle and hopefully eliminate the F7E1 error code.
If, despite following these troubleshooting steps, you continue to experience the F7E1 error code, we recommend consulting the owner’s manual for further guidance or reaching out to Maytag’s customer support. They can provide expert assistance and help you resolve the error code effectively.
Maytag Washer Error Codes
| Error Code | Description |
|---|---|
| F7E1 | Motor speed sensing error |
| F7E7 | Actuator issue |
| … | … |
Troubleshooting F7E7 Error Code Maytag
The F7E7 error code on Maytag appliances typically occurs in washers and is associated with the actuator. If you have replaced the actuator and are still experiencing the F7E7 error code, it is important to check for any broken wires or wiring harness connection issues. In some cases, a broken wire near the red wire coil or a faulty connection can cause this error code to appear.
Inspect the wiring harness and ensure all connections are secure. It’s a good idea to gently tug on each wire to ensure they are tightly connected. If any wires are loose or damaged, they will need to be repaired or replaced. It’s also important to check the wiring harness for any signs of wear or fraying.
If after thoroughly inspecting the wiring and making any necessary repairs, the F7E7 error code still persists, it is recommended to consult the appliance’s manual or reach out to Maytag customer support for further assistance. They will be able to provide you with specific troubleshooting steps or schedule a service appointment if needed.
FAQ
What do the F7E1 and F7E7 error codes on Maytag appliances indicate?
The F7E1 and F7E7 error codes indicate a motor speed sensing error, which means that the motor is unable to achieve the correct speed for the selected cycle.
What should I do if I see the F7E1 or F7E7 error code on my Maytag washer?
First, check if the shipping bolts have been removed from the rear of the washer, as failure to do so can result in noise, vibration, or error codes. If the error codes still persist, try unplugging the washer or disconnecting the power for one minute and then reselect the cycle and press Start.
How do I remove the F7E1 error code on my Maytag appliance?
To remove the F7E1 error code, press the Pause or Cancel button twice and then press the Power button once. If the code is still displayed, try unplugging the washer or disconnecting the power for one minute, then reselect the cycle and press Start. If the issue continues, consult the owner’s manual or contact Maytag customer support.
What should I do if I see the F7E7 error code on my Maytag washer?
The F7E7 error code on Maytag washers is typically associated with the actuator. If you have replaced the actuator and are still experiencing the error code, check for any broken wires or wiring harness connection issues. Inspect the wiring harness and ensure all connections are secure. If the issue persists, consult the appliance’s manual or reach out to Maytag customer support for further assistance.
Leave a Reply