how to fix whirlpool washer code loc?

Did you know that the Whirlpool washer code LOC is one of the most common error codes that users encounter?

When your Whirlpool washing machine displays the code LOC or LC, it means that the control lock has been activated. This safety feature prevents the washer from responding to any buttons pressed while it is locked.

Key Takeaways:

• The Whirlpool washer code LOC indicates that the control lock is activated.
• The control lock prevents the washer from responding to any button presses while locked.
• To deactivate the control lock, follow the steps provided in the rest of this article.

Common Causes of Whirlpool Washer Code LOC

If you see the code LOC displayed on your Whirlpool washer, it indicates that the control lock feature has been activated. This safety feature prevents any buttons from functioning while the washer is locked. To resolve this issue, there are several common causes to consider:

1. The control lock feature was accidentally activated. This can happen if you accidentally press and hold the Control Lock button for a few seconds. To deactivate the control lock, locate the Control Lock button on your washer’s control panel and press and hold it again until the LOC code disappears.
2. The control board is malfunctioning. A faulty control board can misinterpret input signals and lead to the LOC code being displayed. In this case, it’s recommended to contact a professional technician to diagnose and repair the control board.
3. An issue with the user interface control board. The user interface control board is responsible for receiving and transmitting signals between the control panel and the control board. If this component malfunctions, it can trigger the LOC code. A technician should inspect and replace the user interface control board if necessary.
4. Power supply problems. Insufficient power supply or fluctuations in voltage can disrupt normal washer operations and result in error codes such as LOC. Ensure that your washer is properly connected to a stable power source and consider consulting an electrician if power issues persist.
5. Other electronic faults. Various electronic faults within the washer’s circuitry, such as loose connections or damaged wires, can trigger error codes, including LOC. It’s recommended to have a professional technician conduct a thorough inspection and repair any underlying electronic faults.

By identifying and addressing the common causes mentioned above, you can resolve the issue of your Whirlpool washer displaying the code LOC. If the problem persists or you require further assistance, it’s advisable to consult a qualified technician or contact Whirlpool customer support.

Tips for Troubleshooting Whirlpool Washer Code LOC

If you are still encountering the code LOC on your Whirlpool washer, don’t worry. There are a few additional troubleshooting steps you can try to resolve the issue.

Firstly, try resetting the control lock feature by pressing and holding the “Control Lock” or “Lock” button for several seconds. This should deactivate the control lock and allow you to use the washer normally.

If resetting the control lock doesn’t work, make sure to check the buttons on the control panel for any obstructions or debris. Sometimes, dirt or grime can build up on the buttons and prevent them from functioning properly. Use a clean, dry cloth to wipe them down and remove any obstructions.

If the problem persists, it may be a good idea to consult the user manual for your specific Whirlpool washer model. The manual can provide you with more detailed instructions on troubleshooting the code LOC and help you identify any specific issues that may be causing it.

Remember, the code LOC usually indicates a control lock activation, so it’s important to follow the steps mentioned earlier to deactivate it. By following these troubleshooting tips, you should be able to resolve the code LOC error on your Whirlpool washer and get it back to working condition.