how to fix maytag neptune lr code?

Have you ever encountered the LR code on your Maytag Neptune washer? It’s frustrating, isn’t it? This error code, often accompanied by a non-spinning drum, indicates a problem with the motor and motor control board. But here’s the intriguing question: Can you fix it yourself?

In this article, we will unravel the mysteries behind the Maytag Neptune LR code and guide you through the troubleshooting and repair process. From diagnosing the issue to replacing the motor and motor control board, we’ve got you covered.

Key Takeaways:

• The Maytag Neptune LR code points to a motor problem in your washer.
• Troubleshooting the issue can help determine the source of the problem.
• Replacing the motor and motor control board is often necessary to resolve the LR code.
• The repair process is straightforward and can save you money compared to hiring a professional.
• By following our step-by-step instructions, your Maytag Neptune washer can be back in action.

Troubleshooting the Maytag Neptune LR Code

The LR code on your Maytag Neptune washer is an indication of a motor issue. Before considering replacing any parts, it is recommended to troubleshoot the problem to ensure an accurate diagnosis. By following these troubleshooting steps, you can determine the source of the LR code and take appropriate action.

1. Check for Level Ground and Balanced Drum

Start by ensuring that your washer is on level ground. Uneven flooring can cause the washer to tilt, leading to motor strain and the LR code. Additionally, check if the drum is properly balanced. A loose or unbalanced drum can also contribute to motor issues. Listen for any banging noises or excessive shaking during the spin cycle, as they may indicate a suspension problem or a loose drum.

2. Verify Motor Spin Speed

Next, observe if the motor is slow to come up to full spin speed. If the motor takes longer than usual to reach the expected speed or if it struggles to maintain it, it could be a sign of a motor malfunction. This, combined with the LR code, suggests that the motor and motor control board might need to be replaced.

3. Check for Tub Movement

If you notice that the tub movement exceeds 1/4 to 1/2 inch, it could indicate a worn tub bearing. A worn tub bearing can cause the motor to operate at a lower speed, resulting in the LR code. Check the tub bearing for any signs of wear or damage, and consider replacing it if necessary.

By troubleshooting these potential causes, you can gather valuable information to diagnose the issue accurately and determine if motor replacement is required to resolve the LR code error on your Maytag Neptune washer.

Continue to Section 3 to learn how to replace the motor and motor control board to resolve the LR code issue.

How to Replace the Motor and Motor Control Board

To resolve the Maytag Neptune LR code and ensure your washer functions properly, you will need to replace the motor and motor control board. The first step is to order the motor and motor control board upgrade kit, which contains all the necessary components for the replacement.

Once you have the kit, gather some basic tools such as an adjustable-head crescent wrench, Phillips head screwdriver, utility knife, and small ratchet with socket set. These tools will help you with the installation process.

Follow the instructions provided with the kit to guide you through the installation. To start, remove the front panel and the brace on the lower left corner of the washer for easier access. Next, disconnect the wiring harness from the motor and remove the control board. If needed, cut the harness as a new one is included in the kit.

Pay close attention to the connector diagram to ensure proper connection when installing the new motor and motor control board components. Once everything is connected, secure the parts back into place and test the washer to see if the LR code is resolved. By replacing the motor and motor control board yourself, you can save money on hiring a Maytag servicer for the repair.